Can you use a married Cobb Accessport?
If the install option is present, then this Accessport is ready to work on another compatible vehicle. If “Uninstall” is an option, this Accessport is still installed (married) to a vehicle and it will not work on your vehicle until it is uninstalled from that previous vehicle or re-licensed by COBB.
Can you reprogram Cobb accessport on a different car?
If an Accessport was never uninstalled from a previous vehicle, it can be re-licensed, or set to an uninstalled state. The Accessport is essentially 2 parts: the hardware to flash the vehicle and the tuning license that is installed on the car.
Can I just unplug my accessport?
The Accessport does not need to be plugged into the vehicle for the calibration to be in effect. You can disconnect the Accessport at this time or leave it plugged in to use any of the many features outlined below. Please note that the Accessport is designed to work with only one vehicle at a time.
What does it mean if a tuner is married?
This error means that the vehicle you are attempting to tune isn’t the same vehicle the device is VIN locked to. If the device is married to another vehicle and you have access to it, simply return that vehicle to stock.
What does cobb married mean?
#2. Married means that it is still electronically attached to a specific car/VIN and cannot be used on another car/VIN. If you are purchasing one you want to buy one ‘unmarried’.
How to check if accessport is unmarried?
If it is already installed (or “married”) to another vehicle, it will not work on your vehicle. The installed state can be checked by plugging the Accessport into any car (any car with an OBD2 port, compatibility for this step is not required) or computer.
Can I still use a Cobb Accessport V2?
Starting on 1/1/19, all further support of any kind for the V2 Accessport will cease. What does that mean exactly? The V2 to V3 Trade-in Program ends 12/31/2018. New requests for Accesstuner will no longer be offered to V2 users.
How much HP does a Cobb Accessport add?
Cobb accessport will give approx 25+ hp and 14+ torque. The cold air intake from cobb will not give any more hp gains but will give the intake some noises and make the car seem faster or stronger. The stock intake is roughly good for about 400 hp.
Do Cobb access ports still work?
A: Yes! Your Accessport can still be used to tune your car just like you always have.
What is demo mode on Accessport?
Demo Mode. AP-SUB-001 and AP-SUB-002 AccessPORTs now have a demo mode that shows most AccessPORT functions while plugged into a USB port.
How do I manually uninstall?
Uninstall from Control Panel In search on the taskbar, enter Control Panel and select it from the results. Select Programs > Programs and Features. Press and hold (or right-click) on the program you want to remove and select Uninstall or Uninstall/Change.
Can you unplug your ECU?
You might be able to directly disconnect the ECU from the battery by removing the appropriate fuse and waiting for at least 15 minutes. This approach allows the rest of your car’s electrical system to remain connected to the battery.
How do I reset my access point to factory settings?
To reset your AP to the factory-default configuration: Power off the AP. Using a thin, pointed object, such as a pin, press and hold the Reset button. At the same time, power on the AP.
Can you reset ECU to factory settings?
The relearning process for the automobile streamlines as a result, and it enhances the vehicle’s overall performance. You may do an ECU reset on your automobile by detaching it from the battery or resetting the fuse in the box. Both of these options are available to you.
What is the point of a Cobb Accessport?
The Access Port can change things like Ignition Timing, Fueling Curves, Boost Curves, etc., and by doing do, it will allow your motor to produce more power.
Can you tune your car with a Cobb Accessport?
Accessport Tuning Included Off The Shelf Maps unlock power and improve drivability even on otherwise stock cars! Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It’s the last engine management solution you’ll ever need.
How to tell if a tuner is unmarried?
Look to the upright corner and if the box next to the word “Married” is checked, then the device is married to a vehicle. If the box is unchecked, then the device isn’t married and is considered to be unmarried in this case.
What does tuning a girl mean?
Tuning (v): How you act during the flirtatious and not-quite-serious stage of getting to know someone before an official romantic relationship begins.
What does VIN locked mean?
Vin locked means units will marry to the first car they are connected to and will no longer work with a different car afterwards. The unlocked version can be transferred from vehicle to vehicle.
Can I return Cobb accessport?
If you purchased your COBB Tuning branded product directly from COBB Tuning, we back it up with a 30-Day Money Back guarantee. If you are in any way dissatisfied with the performance of your COBB Tuning product, you may return it to us for a full refund within 30 days from the date of purchase.
Is Cobb accessport universal?
Each Accessport is only compatible with certain vehicles. With many platforms, it can even be specific vehicles through specific model year ranges. Luckily, it’s pretty easy to determine which Accessport part number you need.
What does “unmarried” mean on a tuner?
when the AP is first loaded on a car, it is “married” to it; this means it will NOT work with any other car. When you set the car back to the stock program (or take the AP programming off the car), the AP is then “unmarried” and can be used with another car.
Can I still use a Cobb Accessport V2?
Starting on 1/1/19, all further support of any kind for the V2 Accessport will cease. What does that mean exactly? The V2 to V3 Trade-in Program ends 12/31/2018. New requests for Accesstuner will no longer be offered to V2 users.
Will a Cobb AccessPORT work on another car?
Can a Cobb AccessPORT be relicensed?
Can Cobb change the part number of my AccessPORT?
What if a Cobb AP can’t get in?
So, you’ve decided to unmarry your Cobb Accessport, huh? Maybe you’re going back to stock, selling your car, or just want a clean slate. Whatever the reason, unmarrying your Accessport is a straightforward process that’ll have you back to factory settings in no time.
Let’s break it down:
Step 1: Gather Your Supplies
First things first, make sure you have everything you need:
Your Cobb Accessport – You can’t unmarry it without it!
Your car – Obviously, you’ll need your vehicle handy for this process.
A laptop or computer – You’ll need this to connect to your Accessport and perform the unmarry process.
A USB cable – Make sure it’s the correct cable for your Accessport model.
The original stock tune file for your car – You’ll need this to restore your vehicle to factory settings. If you don’t have it, check the manufacturer’s website or a reputable tuner site.
Step 2: Connect Your Accessport
Now, let’s get your Accessport connected:
Turn off your car – Safety first!
Plug the USB cable into your computer – Make sure the other end is connected to your Accessport.
Turn on your Accessport – Your computer should recognize it as a new device.
Step 3: Access the Unmarry Feature
Time to get into the Accessport’s settings:
Open the Accessport software on your computer – You’ll likely find it in the “Cobb” folder on your computer.
Navigate to the “Settings” or “Options” menu – It might be called something different depending on your Accessport’s firmware.
Look for an option like “Unmarry” or “Device Unmarry” – This is where the magic happens!
Step 4: Initiate the Unmarry Process
Now, get ready to uncouple your Accessport from your car:
Select the “Unmarry” option – The software will likely prompt you to confirm this action.
Follow the on-screen instructions – The process might involve rebooting your Accessport or your car.
Be patient – It might take a few minutes for the unmarry process to complete.
Step 5: Flash the Stock Tune (Optional)
Once the unmarry is complete, you have the option to flash the stock tune back onto your car:
Navigate to the “Tuning” or “Flash” section of the Accessport software – This is where you’ll find the option to load and flash a new tune.
Select the stock tune file you downloaded earlier – This will restore your car to factory settings.
Follow the on-screen instructions – The software will guide you through the flashing process.
Be patient – It might take a few minutes for the stock tune to flash.
Step 6: Test Drive and Enjoy
That’s it! You’ve successfully unmarred your Cobb Accessport.
Start your car and take it for a test drive – Make sure everything is running smoothly and that you’re back to factory settings.
Enjoy the freedom of having an unmarred Accessport – You can now use it on another vehicle or sell it with a clear conscience.
Important Notes
Always back up your Accessport data – This includes any custom tunes you’ve created.
If you encounter any issues, consult the Accessport’s user manual or contact Cobb support – They’re there to help!
Never attempt to unmarry your Accessport without the proper knowledge and tools – Improperly unmarrying your Accessport could damage your car or void your warranty.
FAQs
Q: Can I unmarry my Accessport and use it on another car?
A: Yes, you can! Once you’ve unmarred your Accessport, it’s essentially a blank slate, ready to be married to a new vehicle. However, make sure the Accessport is compatible with your new car.
Q: What happens to my custom tunes when I unmarry my Accessport?
A: Your custom tunes will remain on your Accessport. You can back them up and transfer them to your new car or another Accessport, if you’d like.
Q: Will unmarrying my Accessport affect my car’s warranty?
A: Unmarrying your Accessport itself shouldn’t affect your warranty. However, if you flash a custom tune, it might void your warranty.
Q: Is unmarrying my Accessport a difficult process?
A: No, it’s actually quite simple. Just follow the steps outlined above, and you’ll be good to go!
Q: What if I can’t find my stock tune file?
A: Contact your car’s manufacturer or a reputable tuner site. They can likely provide you with a stock tune file for your specific vehicle.
Q: Can I unmarry my Accessport without a computer?
A: No, you’ll need a computer to connect to your Accessport and access the unmarry feature.
Q: What are the benefits of unmarrying my Accessport?
A: Unmarrying your Accessport allows you to:
Sell your Accessport to someone else.
Use your Accessport on another car.
Return your car to factory settings.
Avoid potential warranty issues.
Unmarrying your Cobb Accessport is a simple process that gives you the freedom to make changes to your vehicle and your tuning setup. Remember to take your time, follow the instructions carefully, and don’t hesitate to reach out for help if you need it. Happy tuning!
See more here: Can You Use A Married Cobb Accessport? | How Do You Unmarry A Cobb Accessport
How To Properly Unmarry a Cobb Accessport – YouTube
As easy as it is, here’s how to un-marry a Cobb Tuning Accessport. Smeedia Merch: https://www.smeedia.net/shopSmeedia Discord Server: https://discord.gg/qeY… YouTube
HOW TO UNMARRY A COBB ACCESSPORT – YouTube
144. 9.6K views 1 year ago. Today we’re going over to to un marry an Cobb AP from your car as well as how to tell if one is married or unmarried to a car when YouTube
How exactly do you “unmarry” an accessport. – NASIOC
When you uninstall the AccessPORT it writes the stock map that was previously on the ECU back to the car, this is part of the uninstall process. DO NOTE: NASIOC
How to check if a cobb accessport v3 is unmarried?
First things first, the original question: If purchasing a used Accessport you’ll want to confirm the Accessport is uninstalled from a previous vehicle by plugging it into your OBDII port (or ANY vehicle’s NASIOC
Accessport Reset????? Help please! – NASIOC
If you have access to an engineer who works with this stuff and a friend who has a married car + AP, tell your engineer you have: 1) Tools to read a stock ROM 2) NASIOC
Complete Cobb AccessPort Guide: Features, Values, Set up
Complete Cobb AccessPort Guide: Features, Values, Set up, Tuning & More. Smeedia. 142K subscribers. 4.7K. 180K views 2 years ago. I have a few Access YouTube
COBB accessport unmarry help READ : r/COBBtuning – Reddit
Mail the ECU and AP to Cobb and have them uninstall for you. They’ve got the means to do that, so both the ECU and AP are back to “uninstalled” states. Yeah, your other Reddit
Cobb Accessport a few questions | Subaru WRX Forum
#1 Mar 15, 2015. Just ordered the accessport. Can you install it without flashing? I am only 1050 miles in on the car. Was thinking if you could just use it for logging what the Subaru WRX Forum
Unmarrying Cobb Accessport…?? – Subaru WRX Forum
#1 Sep 11, 2007. I just recently traded my 02 wrx in, without realizing that I had to unmarry the Accessport [version 1], in order to sell it for someone elses use. Is there a way to Subaru WRX Forum
Buying a Used Accessport – COBB Tuning
It can only be unmarried with the car it is installed on. If that’s not an option, it can be re-licensed. That cost will vary depending on which Accessport part number you have. Check out the article above COBB Tuning
See more new information: activegaliano.org
How To Properly Unmarry A Cobb Accessport
How To Unmarry A Cobb Accessport
How To Uninstall Cobb Accessport V3 | Subaru Wrx
Used Accessport V3 Subaru Wrx Guide
The Cheapest Way To Get A Cobb Accessport!
Link to this article: how do you unmarry a cobb accessport.
See more articles in the same category here: activegaliano.org/bio
