Let’s discuss the question: how to french polish a violin. We summarize all relevant answers in section Q&A of website Activegaliano.org in category: Blog Marketing. See more related questions in the comments below.
Can you French polish a violin?
Although you can use a French alcohol or French Polish technique at home, it’s better to have a professional polish your violin with these techniques if you aren’t 100% sure that you can do it correctly. The French alcohol polish method involves using mineral oil and ethyl alcohol.
What is the French polishing technique?
French polishing is a wood finishing technique that results in a very high gloss surface, with a deep colour and chatoyancy. French polishing consists of applying many thin coats of shellac dissolved in denatured alcohol using a rubbing pad lubricated with one of a variety of oils.
Wesley Baggett French Polishing a new violin.
Images related to the topicWesley Baggett French Polishing a new violin.
Should you polish your violin?
Only use water on a damp cloth to clean the body of your violin – you should never use polish or other harsh chemicals, as this can damage the varnish.
How do you do Shellac French polish?
- Start by sanding. …
- Mix your shellac. …
- Make your dabber. …
- Start with your sealer coat. …
- Fill in open grain with pumice powder. …
- Begin to French polish in earnest. …
- Spirit the finish. …
- Repeat as necessary.
How do you fix a varnish on a violin?
- fill with the harder clear varnish.
- lightly add a layer of pigment wash.
- cover the dried pigment layer with clear spirit varnish.
- repeat color layers as needed.
- finish polishing etc…
What oil do you use for French polishing?
Oils Used For French Polishing
The most commonly used oil is probably olive oil. The second would be mineral oil, followed by walnut oil. Different oils have different properties they bring to the finish during application as well as the long term properties of the finish itself.
What is the difference between Button Polish and French polish?
Button Polish is a solution of unbleached shellac, dispersed in a fast drying alchohol carrier (Methylated Spirits), it produces a slightly warmer more golden/orange to the finished work, than Brown French Polish.
How long does it take for French polish to harden?
Re: Drying time for French Polish shellac
sounds like it you may have just built up a thick coat. Once it stops smelling like alcohol up close it ought to be hard enough to proceed, that should definitely be the case within 24 hours.
How can I make my violin shine?
Using a special varnish cleaner or almond oil on a soft cloth, rub it gently over the belly and back of the instrument to dissolve any rosin that may have accumulated there. Sometimes, this is a time-consuming process. You may want to clean small sections at a time, as there can be quite a layer of rosin to remove.
Can I use olive oil to clean my violin?
Olive oil would be fine for polishing a new instrument because the varnish will be in its finest, most protective state at the moment. On the other hand, olive oil will never dry, so any dust or dirt will stick to the instrument until it’s cleaned again.
Adventures in Violin Repair – Part 4 – French Polishing (reposted)
Images related to the topicAdventures in Violin Repair – Part 4 – French Polishing (reposted)
Can you use guitar polish on a violin?
Guitar polish can damage a violin’s varnish finish and should never be used on a violin. Guitars have a hard lacquer finish that can withstand the chemicals found in guitar polish. However, violins are finished with a varnish made for violins that help enhance the violin’s sound.
Is it OK to clean violin with water?
The safest bet is to wipe your violin down after each playing session with a dry, microfiber cloth, and bring your violin to a luthier for professional cleaning and polishing at least once every year or so. Never use solvents or hot water to clean the violin!
How do you clean an old violin?
If you can’t take it to a luthier, the safest way to clean it is not using chemical products or violin cleaner/polishers. You can remove lots of dirt with a sligthly damp soft rag (much more dry than wet), it will do no harm to the instrument.
Can you put new shellac over old shellac?
You can control the color by applying amber shellac until you get the color you want, and then adding a clear shellac topcoat over it. If your shellac surface is “alligatored” with small cracks throughout the finish, it can be repaired.
Can you put varnish over French polish?
The answer is that French polishing only works with shellac. It surely doesn’t work with a varnish (wipe-on poly) or water-based finish.
Can a violin be refinished?
Refinishing an instrument for aesthetics is not recommended. One of history’s great, unsolved mysteries is what makes the sound produced by the finest of Italian violins so magnificent.
What is spirit varnish?
Definition of spirit varnish
: a varnish in which a volatile liquid (such as alcohol) is the solvent.
Can you stain a violin?
Stains & Primers: If the unfinished instrument is to have a beautiful basic color, it should be stained before varnishing. But since the hardness of the wood can vary, thus absorbing the stain unevenly, it is recommended that the basic instrument be pretreated to ensure that the color is attractively even.
What are the mix of a French polish?
French polish is a mixture of shellac and oil. Little oil is needed; it acts as a lubricant for the shellac.
How to clean your instrument and Olaf French polishes a violin
Images related to the topicHow to clean your instrument and Olaf French polishes a violin
Can you French polish over Danish oil?
probably. Two coats isn’t very much and if your Danish tung oil is watery thin it should mean that there is hardly any sitting on the surface. I often French polish on top of Danish Oil but I have two ‘rules’: Don’t have it sitting on the surface.
Can you sand off French polish?
Super Fine. Used to remove some luster or surface blemishes and scratches on the final coat of finish. For most projects, you can stop sanding at 150 or 180-grit, but if you plan to use a water-based stain then we recommend sanding up to a 200-grit sandpaper.
Related searches
- how to clean rosin off violin strings
- violin cleaning kit
- how to polish your violin
- violin polish recipe
- cleaning violin with olive oil
- how to polish a violin
- diy violin polish
- how to clean and polish a violin
- how to french polish a guitar
- how to clean rosin off violin
- how to polish violin at home
- hill violin polish
- varnish cleaner violin
Information related to the topic how to french polish a violin
Here are the search results of the thread how to french polish a violin from Bing. You can read more if you want.
You have just come across an article on the topic how to french polish a violin. If you found this article useful, please share it. Thank you very much.
